BFLZK - ZA-43 KIT; ZL-22A PENETRANT (PRE 12/88)

  • MSDS: BFLZK
  • Manufacturer: MAGNAFLUX CORP
  • Product Name: ZA-43 KIT; ZL-22A PENETRANT (PRE 12/88)
  • National Stock Number: 6850-00-703-7406
Product Identification

Product ID:ZA-43 KIT; ZL-22A PENETRANT (PRE 12/88)
MSDS Date:08/15/1984
FSC:6850
NIIN:00-703-7406
Kit Part:Y
MSDS Number: BFLZK

Responsible Party
MAGNAFLUX CORPORATION
7300 W. LAWRENCE AVENUE
CHICAGO, IL 60656-3504
US

Emergency Phone: 708-867-8000, CHEMTREC 800-424-9300

Info Phone: 708-867-8000

Cage: 37676

Contractor
ILLINOIS TOOL WORKS INC MAGNAFLUX DIV
GLENVIEW, IL 60025 US

Telephone: 847-657-5300/

Cage: 37676

Ingredients

PETROLEUM HYDROCARBONS

Fraction By Weight: 69%

ACGIH TLV: 200PPM


DIPHENYL OCTYL PHOSPHATE(OR ETHOXYLATED OCTYLPHENOL)

Fraction By Weight: 24%


ORGANIC FLUORESCENT DYE

Fraction By Weight: 5%

ACGIH TLV: U/K


CARBON DIOXIDE

CAS: 124-38-9

RTECS: FF6400000

Fraction By Weight: 2%

OSHA PEL 5000 PPM

ACGIH TLV: 5000PPM/30000STEL;93

Hazards

Routes of Entry: Inhalation:YES Skin:UNKNOWN Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Effects of
Overexposure:INHAL:DIZZINESS,DROWSINESS,NAUSEA;SKIN:IRRITATION,DEFA
T,DERMATITIS;EYES:IRRITATION

First Aid

First Aid:INHALE:REMOVE TO FRESH AIR, GIVE CPR/O*2 IF
NEED;EYES/SKIN:FLUSH W LG AMTS H*2O FOR 15 MIN;INGEST:RINSE MOUTH;
GET MEDICAL ATTENTION FOR EYES, BREATHING DIFFICULTY, OR OTHER
SYMPTOMS OF OVEREXPOSURE.

Fire Fighting

Flash Point:175 F PMCC
Lower Limits:1
Upper Limits:6
Extinguishing Media:DRY CHEMICAL,FOAM,CARBON DIOXIDE
Fire Fighting Procedures:KEEP CANS COOL WITH WATER SPRAY.
Unusual Fire/Explosion Hazard:AEROSOL CANS MAY BURST IF HEATED ABOVE
130F. VAPOR CAN BE TOXIC WHEN EXPOSED TO FLAMES,HOT SURFACES.

Accidental Release

Spill Release Procedures:SOAK UP WITH SWEEPING COMPOUND AND COLLECT
FLUSH RESIDUE WITH WATER

Handling

Handling and Storage Precautions:KEEP CONTAINER CLOSED.STORE AWAY FROM
HEAT IN DRY LOCATION
Other Precautions:WASH OFF SKIN.OF EXPOSURE IS FREQUENT USE PROTECTIVE
GLOVES.REMOVE CLOTHING SATURATED WITH PRODUCT.

Exposure Controls

Respiratory Protection:NOT NORMALLY NEEDED BECAUSE OF LOW
VOLATILITY.RECOMMEND IF SPRAYED
Ventilation:GENERAL-ACCEPTABLE
Protective Gloves:RUBBER
Eye Protection:SAFETY/CHEM GOGGLES
Other Protective Equipment:USE FILTER TYPE RESPIRATOR TO TRAP MIST IF
SPRAYING
Supplemental Safety and Health
KEY1:J7. KIT CONSISTS OF FOUR PARTS; SEE ADDITIONAL DATA FOR NAMES OF
PARTS.

Chemical Properties

HCC:V3
Boiling Pt:B.P. Text:400 F IBP
Vapor Pres:.25
Vapor Density:UNKN
Spec Gravity:0.97
Solubility in Water:INSOLUBLE
Appearance and Odor:GREASE,OILY LIQUID
Percent Volatiles by Volume:2.0

Stability

Stability Indicator/Materials to Avoid:YES
ALKALI MATERIALS,WILL SOFTEN SOME PLASTICS & COATINGS.

Disposal

Waste Disposal Methods:FOLLOW LOCAL,STATE AND FEDERAL REGULATIONS.TREAT
AS OILY WASTE MATERIAL IS COMBUSTIBLE.BURNING IS BEST ULTIMATE
DISPOSAL METHOD IF ALLOWED UNDER REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.